VITOKORK Spacers are used as distance holder for storage and transport of PVC windows covered with protection film.
VITOLEN Spacer
VITOLEN spacers are used on various surfaces such as wood, PVC, glass and metal.
VITOPUR Spacer
VITOPUR spacers are used as distance pads on substrates like unpainted wood, PVC, glass or metal.
VITOFLEX Spacer
VITOFLEX Spacers are used as distance pads for stacking and transportation of windows consisting of PVC or metal.
Sealing Tapes
VITOLEN 111 UVR
Foam adhesive tape for applications with high UV exposure
Vitolen 142
Einseitig klebendes Schaumstoffband für den Verschluss von Rohrisolierungen, z.B. aus (EPDM-)Schaumstoff.
VITOPLAST 130
One-sided self-adhesive sealing tape. It consists of polyurethane foam based on polyester, reinforced by polyester film
VITOFLEX CM-L
Very good aging, weathering and ozone resistance. For protecting, damping, insulating and sealing.
VITOLEN 111
VITOLEN 111 is used for sealing and insulation
VITOLEN 120
VITOLEN 120 is used for sealing and insulation.
VITOLEN 110
VITOLEN 110 is used for sealing and insulating purposes and as distance tape. It is especially used when a high compressive strength is required.
VITOLEN 120-H Nail sealing tape, double-sided adhesive
Double-sided self-adhesive sealing tape of a closed-cell cross-linked polyethylene foam
VITOLEN 111-G Nail sealing tape
One-sided self-adhesive sealing tape of a closed-cell cross-linked polyethylene foam and exposed adhesive side
VITOFLEX NF
Good resistance against oils and fats. Self-extinguishing.
VITOSEAL 100 S005
One-sided self-adhesive tape for sealing and damping, for interior and exterior use. Self-extinguishing. Very good UV resistance.
VITOSEAL 100 PW
For sealing and dampening, for interior and exterior use.
VITO joint tape BG2
VITO FUGENBAND BG2 is a one-sided self-adhesive pre-compressed joint sealing tape based on polyurethane soft foam, saturated with an acrylic impregnation.
VITO joint tape BG1 XL
VITO Fugenband BG1 XL is the joint sealing tape version with greater roll lengths.
VITO joint tape BG1
VITO FUGENBAND BG1 is a one-sided self-adhesive pre-compressed joint sealing tape based on polyurethane soft foam, saturated with an acrylic impregnation
Double-sided adhesive foam tapes
VITOMOUNT SOLAR SSPR 70
Double-sided self-adhesive tape made of polyethylene foam, for the bonding of frames
VITO MOUNT 125 SA-220
Double-sided adhesive foam tape for high demands, used for fixing trims in the automotive industry.
VITO MOUNT 125 SS-70 PBR
This tape is suitable for permanent mounting of materials with even or slightly rough surfaces, for indoor and outdoor use. It is particularly suitable for mounting mirrors.
VITOMOUNT 125 SD-70 H
VITOMOUNT 125 SD-70 H is used for permanent mounting of small parts like wall hooks, displays and holders. It is particularly suitable for adhesion on low energy surfaces such as polyethylene and polypropylene.
VITOMOUNT 125-70
For the connection of light materials like strips, profiles, signs, emblems and paper boards.
VITO MOUNT 125 S-201 RP
VITOMOUNT 125 S-201 RP is used for the fixing lenses on the blocker during the grinding process. The high stability of the foam and the high cohesion of the adhesive avoid separating of blocker and lenses due to torsion force
VITOMOUNT SL55 PLG1
An alternative to our SSPR-product, with well-balanced mechanical properties.
VITO MOUNT 125 SSPR-70
It is particularly suitable for bonding PVC profiles to window glass and PVC window sash profiles to insulation glass.
VITO MOUNT 125 SS-100
It is particularly suitable for mounting mirrors, also in rooms with temporary higher air humidity as in bathrooms.
VITO MOUNT 125 SS-70
This tape is suitable for permanent mounting of materials with even or slightly rough surfaces, for indoor and outdoor use. It is particularly suitable for mounting mirrors.
VITO MOUNT 125 S-30 FBL2
VITOMOUNT 125 S-30 FBL2 is particularly suited as a mounting aid, for the mounting ofwooden georgian bar profiles with subsequent sealing
VITOMOUNT 125 SO-70
VITOMOUNT 125 SO-70 is used for adhesion on various surfaces, also on low energy surfaces.
VITOMOUNT DG 75 FBL2
VITOMOUNT DG 75 is particularly appropriate for mounting of insulation glass with PVC window sash profiles.
VITOMOUNT 125 glazing bar tape
Window sash bar mounting tape: for the fixing of window sash bars made of PVC, wood and metal.
VITO glazing mount 400
Spacer tape for the assembly in the building façade (structural glazing) and for the fixing of frames on thermal solar collectors.
Double-sided adhesive tapes
VITOCOLL 342 E 08 FBL
VITOCOLL 342 E 08 FBL is equipped with a filamentary scrim and the adhesive is modified with a flame retardant
VITOCOLL 401
VITOCOLL 401 – good adhesion on low energy surfaces such as PE and PP.
VITOCOLL 104
Very good weathering resistance
VITOCOLL T 306
VITOCOLL T 306 is used for permanent adhesion to metals, varnishes as well as high and low energy surfaces of plastic materials.
VITOCOLL 538 B09
VITOCOLL 538 B09 is used for the residue-free removable bonding of products, for indoor and outdoor applications.
VITOCOLL 242 B14
VITOCOLL 242B14 is used for self-adhesive finishing of materials like felt, film, paper, foam and tissue
VITOCOLL 132 A07
VITOCOLL 132A07 is used for lamination of materials such as metal, plastics and glass, for indoor and outdoor applications.
Joint sealing tapes
VITO joint tape BG2
VITO FUGENBAND BG2 is a one-sided self-adhesive pre-compressed joint sealing tape based on polyurethane soft foam, saturated with an acrylic impregnation.
VITO joint tape BG1 XL
VITO Fugenband BG1 XL is the joint sealing tape version with greater roll lengths.
VITO joint tape BG1
VITO FUGENBAND BG1 is a one-sided self-adhesive pre-compressed joint sealing tape based on polyurethane soft foam, saturated with an acrylic impregnation
Self-adhesive metal tapes
VITO COPPER 620
VITOKUPFER 620 is used in electrical engineering for EMC compliant production, in particular for switches and alarm devices.
VITOMINIUM 600 SV
VITOMINIUM 600 SV is used for insulation in heating, air-conditioning and ventilation technology, as vapor barrier and as heat, radiation and light reflector. The product is also used for sealing of reaction tanks and for pipes and tanks for gas-shielded welding.
VITOMINIUM PET 230
For sealing of fire-protection glass
Medical care products
VITO stress mount
The permanent adhesive force is particularly strong, even under long-time strain with strong transpiration and a high level of heat on skin.
VITO Medmount
Suitable for use on skin. The foam is treated on the surface for better anchoring of adhesives and printing ink.
VITO Medvlies
VITO MEDVLIES 4 has been designed to manufacture ECG- and children cable electrodes. The adhesive combines good adhesion with good skin compatibility.
Mirror Mounting Bracket
VITOMOUNT mirror tapes
Double-sided self-adhesive mounting tapes for the mounting of mirrors
VITOFIX PLUS I
Can be used for the mounting of mirrors up to 1,6 m² size and 6 mm thickness (mirror weight up to 24 Kg)
Spacers
VITO Stacking discs
Stacking discs, slightly self-adhesive with a paper backing
VITOFLEX Stacking discs
Vitoflex stacking discs are used for stacking and transporting plastic and metal windows.
VITOKORK Soft
Distance and shippig pads made of cork, with self-adherent PVC foam. Different versions available!
VITOKORK für Lisec / Forel Automaten
For automatic processing for Lisec / Forel machines
VITOKORK für Glaston / Lenhardt / Bystronic
Für die automatische Verarbeitung mit für Glaston / Lenhardt / Bystronic Maschinen
VITOKORK stacking discs
The spacer pads for glass are based on agglomerated PUR-bonded cork equipped with a low-adherent adhesive on one side.
Partition wall tapes
VITOLEN 120 TWB
VITOLEN 110 is used for sealing and insulating purposes and as a distance tape. It is especially used when a high compressive strength is required.
VITOLEN 111-G TWB B1
One-sided self-adhesive sealing tape made of closed-cell cross-linked polyethylene foam. The adhesive side is exposed.
Glazing Tapes
VITOGLASS 120 2-6 mm
One-sided self-adhesive sealing tape of a closed-cell cross-linked polyethylene foam with skin, reinforced by scrim.
VITOGLASERFIX 111
One-sided self-adhesive sealing tape of a closed-cell cross-linked polyethylene foam with skin, with exposed adhesive layer. It is used for sealing and insulating purposes. It is especially used as glazing tape prior to final sealing.
VITOGLAS 120 coils
VITOGLAS 120 in bobbins is used for sealing and insulating purposes. It is especially used as glazing tape prior to final sealing.
